www.deejaysystem.com
Hardware controllers for Deejaysystem(tm) MK2 / VJ2
 
 
Manual > Hardware controllers > Visiosonic DAC-2 / Numark DMC-1 Español

Visiosonic DAC-2 / Numark DMC-1

These controllers are internally the same hardware. The difference is that the Visiosonic DAC-2 (black) is connected by USB while the Numark DMC-1 (white) is connected via serial cable (RS232). Stand out for their jog-wheel with the outer ring, allowing additional control to easily scroll through the song.

Note: It is necessary that the controller firmware is upgraded to the latest version. Learn more (manufacturer site).

No longer available, search information on Google


Playlist
Function Control
Show playlist / video output GROUP
Move cursor up - down CUE MEMORY
SHIFT + CUE MEMORY
Open selected song LOAD
Close open song SHIFT + LOAD
Playback
Function Control
Play / Pause / Cue PLAY/PAUSE, CUE
Positioning JOG-WHEEL (in Pause/Cue)
JOG-WHEEL Aro Externo
Pitch PITCH CONTROL
SHIFT + PITCH BEND
SHIFT + JOG-WHEEL
Pitch bend PITCH BEND
JOG-WHEEL (in playback)
Video
Function Control
Show playlist / video output GROUP
Show video at Master (VIDEO OUT) LOOP PREV
Select video mixing effect FX
 

(c) 1998-2013 Angel García "Edy"